VelLight LEDC12 Manual Del Usuario página 5

Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, press
RGB mode
 With the lights on, press
The available patterns are:
Mode Function
1 Static red
2 Static blue
3 Static purple
4 Static green
5 Static yellow
6 Static cyan
V. 01 – 28/03/2013
LEDC12
.
to select a mode.
Comment
5
Brightness is
adjustable, speed is
not adjustable.
©Velleman nv