EAS ELECTRIC EMD122BI Manual De Instrucciones página 62

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Spray arms
It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
1
To remove the upper spray arm,
hold the nut, rotate the arm
clockwise to remove it.
3
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. Replace them after rinsing
them thoroughly.
2
To remove the lower spray arm, pull
out the spray arm upward.
13
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido