Epson ELPIF01 Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Removing
When Images are not Displayed
Make sure that the screws on the interface board are tightened securely.
Make sure that the projector's [Video Terminal Settings] are correct. For details, see the
guides supplied with the projector.
Check that the projector or the interface board is using the latest rmware version. For
inquiries, use the contact details provided in the guides supplied with the projector.
8
Loosen the xing screws (4 points) with a
A
commercially available No. 2 cross-head
screwdriver.
Grip the knob, and pull the interface board
B
straight out.
Make sure the slot cover or an interface
board is always installed in the slot. If dust or
trash enters the projector, it could cause a
malfunction.
Caution

Publicidad

Tabla de contenido
loading

Tabla de contenido