Insert / Change The Map Cd - Audiovox NPC5000 Instrucciones De Manejo

"Volume control" function
You can select the following options in the "Volume Level" menu:
• SDVC:
• Audible info.:
• Volume:
Changing the language
Select the "Language" option from the "System settings" menu.
Select one of the languages loaded in the system:
• US English
• Spanish

Insert / change the map CD

— If the red power LED is on then press the eject button s on the navigation
computer once (normally when the ignition is switched on).
— If the red power LED is not on then press the eject button s twice.
The CD is ejected.
— Take out the CD and carefully insert the new map CD with the label facing up
until it is retracted.
The system takes a few seconds to start after changing the map CD.
(SDVC = Speed Dependent Volume Control) For selection of a
curve for speed dependent volume control (options "Volume
Control +" to "Volume Control ++++").
The volume level is increased in correlation with the speed in
order to compensate for ambient noise. Test the various
SDVC curves in order to determine the one that is most suit-
able. The volume level increase is switched off with the option
"SDVC off".
To activate / deactivate audible information. The symbol
displayed in the status line when the audible information is
deactivated.
Volume of the guidance information.
Set the desired volume with the cursor buttons
are changes you will hear either "Louder" or "Softer" in the
volume selected. To save the setting press the OK-button.
Operation
l
is
4 6
or . If there
25