Others; Useful Functions; Setting Auto Standby - Pioneer A-40AE Manual De Instrucciones

Useful functions

Setting auto standby

1
2
3
20
3"
3"
ON
(BLINKING)
OFF
(LIGHTING)
When automatic standby is on (default value), the unit
automatically switches to standby mode after 20 minutes of
no audio input without any operations.
1. Press and hold Í STANDBY/ON on the main unit until
the "DIRECT" and "LOUDNESS" indicators either blink or
light.
0 The unit has switched to the setting mode when the
indicators blink or light and the current setting is
displayed.
2. Take your finger off Í STANDBY/ON for a moment.
3. Switch auto standby on or off by pressing and holding
Í STANDBY/ON again.
- On (default value): "DIRECT" and "LOUDNESS"
indicators are blinking
- Off: "DIRECT" and "LOUDNESS" indicators light
0 The setting mode ends after 5 seconds elapse with no
operations performed.
0 60 seconds before switching to standby mode, the
SPEAKERS indicator and the indicator for the selected
source start blinking.
0 Depending on the connected device, the auto standby
feature may not engage due to factors such as noise.

Others