GE PT925 El Manual Del Propietario página 23

Tone Volume
+
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the COOK TIME pad. The display
will show 2 BEEP. This is the middle
volume level.
Touch the COOK TIME pad again. The
display will show 3 BEEP. This is the
loudest volume level.
12-Hour, 24-Hour or Clock Blackout
+
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display, follow
the steps below.
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the CLOCK pad once. The display
will show 12 hr. If this is the choice you
want, touch the START pad.
Auto Recipe
+
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
This feature is activated so that the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
START pad, the display will show CON and the
Conversion
™
Touch the COOK TIME pad again. The
display will show 1 BEEP. This is the
quietest volume level.
For each time the level is changed, a tone
will sound to provide an indication of the
volume level.
Choose the desired sound level (1 BEEP, 2
BEEP, 3 BEEP).
Touch the START pad to activate the level
shown.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the
choice you want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
To deactivate the feature:
™
Touch the upper oven BAKE and BROIL
HI/LO pads at the same time until the
display shows SF.
Touch the CONVECTION BAKE pad.
The display will show CON ON. Touch
the CONVECTION BAKE pad again. The
display will show CON OFF.
Touch the START pad.
To reactivate the feature, repeat steps 1–3
above but touch the START pad when CON ON
is in the display.
GEAppliances.com
23