Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code "H99". Please
consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft, dry
cloth.
Coils and fans should be clean
for at least every 6 months by an
authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Front panel
Wash gently and dry.
Remove the front panel
Pull out and lift up
2
1
Release
the hooks
at both
ends
Close it securely
3 Close down
4 Press both ends and center of the front panel
2
Push in
1
Insert
at both
sides
Indoor unit
Anti-bacterial filter
Front panel
Air filters
Air filters
Once every 2 weeks
• Wash/rinse the filters gently with
water to avoid damage to the
filter surface.
• Dry the filters thoroughly under shade, away
from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter
Anti-bacterial filter
• Clean the filter whenever necessary.
• Wash/rinse the filter gently with water to avoid
damage to the filter.
• Dry the filter thoroughly under the shade, away
from fire or direct sunlight.
• Replace the filter every 10 years or replace any
damaged filter. Part no.: CZ-SA22P
Aluminium fin
Attach air filter
Insert into the unit
Anti-bacterial filter.
21
Publicidad
