Fracarro SAF-HD 10 Instrucciones De Funcionamiento página 32

CONTROL
UNIT SETUP
Setting the access
PIN (default 1234)
Setting the LCD
contrast.
Accepted values 0...
15
Load/Save
configuration from/to
USB
Setting the
serial port speed
Reading the installed
software version
Default Reset:
restore the unit to the
factory settings
From the "CONTROL UNIT" menu, it is possible to change the menu language, set the user code, modify
the LCD contrast, save the SAF-HD unit configuration in a USB pen drive, load the configuration from the
USB pen drive, change the communication speed of the serial port (we recommend 57600 bps), check the
software version of the SAF-HD unit, and reset the unit to the default settings.
5.8 CONTROL UNIT MENU
Select language from the
programming menu
CONTROL UNIT
LANGUAGE
CONTROL UNIT
PIN
LCD CONTRAST
CONTROL UNIT
LCD CONTRAST
LCD CONTRAST
USB
CONTROL UNIT
STORAGE
USB STORAGE
LOAD
USB STORAGE
SAVE AS
CONTROL UNIT
SERIAL SPEED
CONTROL UNIT .
SOFTWARE VERSION
SOFTWARE
VERSION
CONTROL UNIT
RESET DEFAULT
LANGUAGE
Italiano
LANGUAGE
English
PIN
Enter code
YES
****
PIN
Code disabiled
NO
0
To select
15
Enter USB
YES=V / NO=X
Enter USB
YES=V / NO=X
SERIAL SPEED
115200 bps
To select
SERIAL SPEED
9600 bps
version
Default Reset?
YES=V / NO=X
32
Italiano
Francais
To select
Espanol
Portuguese
Deutsch
English
Re-enter code
****
LOAD
Press DOWN to
scroll down the
files
SAVE AS
Configuration1
9600 bps
19200 bps
38400 bps
57600 bps (default value)
115200 bps
LOAD
Configuration1
SAVE AS
Saving OK