Sunrise Medical Oxford Advance Manual De Instrucciones Y Garantía Para El Usuario página 14

14
descent is controlled. This facility allows for a "hands free" descent. If the release
valve is opened a fraction (a quarter turn) a very slow speed of descent will allow the
caregiver to work "hands free" while assisting or comforting the patient. REMEMBER to
close the release valve before commencing lifting operations. The release valve only
requires gentle pressure to open or close. DO NOT apply excessive force to the release
valve, either to close or to open. It is not necessary and will only damage the valve.
9. Slings
The selected sling is attached to the spreader bar hooks, each sling is supplied with
instructions. Please study the instruction guide for the lifter and sling before using. Once
the correct sling has been selected for the patient, attach it to the spreader bar hooks.
CHARGING INSTRUCTIONS FOR THE OXFORD/HOYER ADVANCE LIFT
The batteries are located in the power pack and are charged through a socket at the
base of the control box.
1. Insert the power supply plug into the charge point at the base of the control box.
The plug is inserted with a straight push. DO NOT twist the plug in the socket.
2. Plug the charger mains lead/cord into a suitable mains/power outlet and switch
the mains/power supply ON.
3. Charging is fully automatic. The LCD indicator indicates the status of the charg-
ing. Note: Even if the charger is left plugged in for extended periods it will not
allow the batteries to "overcharge".
4. To return the lift to service, switch OFF the mains supply, pull the charger socket
out and disengage from the mains supply
294000.10003 Rev. A
Removable Battery Pack
Charge Point
E n g l i s h