Cleaning & Maintenance - EQUATION YCD02-5 Manual De Instrucciones

All manuals and user guides at all-guides.com
• WARNING: Your heater shall be used as portable appliance only(thanks to
respect all the safety warnings given below).
Move the heater only by its handles.Never move the heater when it's working.
Never let the heater under the rain or under wet conditions.
Put the heater only on plane, clean & empty surface.
• WARNING: Let a minimum distance of 1m between any side of your appliance
and any obstacle (furniture or walls, for example)
• WARNING: Always use your appliance with rollers or feet fixed.
• THIS PRODUCT IS FOR ROOM HEATING
• Plug the appliance to a 220-240V 50-60Hz socket. If you are not sure, we
advice you to contact a professional electrician for more details.
• To start the heater, choose power I/II/I+II.
• Set the temperature with the thermostat.
• To stop the heater, put the switch on the position sympolized by "0".
• Unplug the product when it's not in use.
• Switch off and unplug from the power supply before cleaning.
• Using a soft, moist cloth, with or without a mild soap solution, carefully clean
the exterior surface of the product.
• CAUTION: Allow the product to completely cool before handling or cleaning
it.
• Do not allow water or other liquids to run into the interior of the product, as
this could create a fire and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running
a vacuum cleaner nozzle over the guards to remove any dust or dirt that may
have accumulated inside or on the unit.
• CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they
may damage the surface finish of the plastic components.
2. INSTALLATION
4. CLEANING & M AINTENANCE
39
3. HOW TO USE