Metra 95-7618G Instrucciones De Instalación página 3

Double DIN head unit provisions
1. Attach the (4) white panel clips to
the radio housing
2. Attach the radio brackets to the
aftermarket DDIN radio with the
screws supplied with the radio.
(Figure A)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Reassemble dash in reverse
order of disassembly using the
95-7618G radio trim panel instead
of the factory panel.
Kit Assembly
(Figure A)
95-7618G
3