Finish Mounting; Specifications - DESA Specialty Products JourneyMan HD-9260 Manual Del Usuario

Finish Mounting

❒
Align the JourneyMan
and the mounting bracket hole. Secure with
M5 x 0.8 x 40 mm mounting screw supplied.
❒
Push the rubber plug firmly into place.
❒
If not installed on a weatherproof box, caulk
between the cover plate and mounting sur-
face with silicone weather sealant.
®
cover plate, gasket,
To obtain maximum lamp
life, keep the tubular
lamps horizontal.
Rubber Plug
CAUTION: To Avoid Fire Or Burn Hazards:
• Allow fixture to cool before touching. The bulb and the fixture
operate at high temperatures.
• Keep fixture at least 3" (76 mm) from combustible materials.
Do not aim at objects closer than 3' (1 m).
• Use only type T 250W (max.) tungsten halogen 120 VAC lamps.

Specifications

Range .............................. Up to 100 feet (30.5 m) with
Sensing Angle ................. Up to 270°
Fixture Load ................... Up to 500 Watts Maximum
Sensor Load Capacity ..... Up to 1000 Watts (8.3 amps)
Power Requirements ....... 120 VAC, 60 Hz
Operating Modes ............ TEST, AUTO and MANUAL
Time Delay ..................... 1, 5, 20 minutes
Sensitivity ....................... Adjustable
DESA Specialty Products™ reserves the right to
discontinue products and to change specifications
at any time without incurring any obligation to in-
corporate new features in products previously sold.
-8-
Range Boost On; up to 70
feet (21 m) with Range
Boost Off. (Varies with sur-
rounding temperature).
Incandescent [Up to 250
Watts Maximum each lamp
holder.]
Maximum, Incandescent
MODE
598-1146-01