Technical Data; Vibration Level - Rebel RB-1011 Manual Del Usuario

Technical data

Battery
Charging time
AC charger (RB-2001-CH)*
Chuck
Impact energy
Impact rate
No load speed
Max. drilling diameter in concrete
Max. drilling diameter in steel
Max. drilling diameter in wood
Weight
In set
Sound pressure level L
Sound power level L
Hand-arm vibration a
impact)
* The battery and the AC charger are not supplied.

Vibration level

The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 61029; it may be used to compare one
power tool with another and as a preliminary assessment of exposure to vibration when
using the power tool for the applications mentioned.
• Using the power tool for different applications, or with different or poorly maintained
accessories, may significantly increase the exposure level.
• The times when the power tool is switched off or when it is running but not actually
doing the job, may significantly reduce the exposure level. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the
power tool and the accessories, keep the hands warm, organization of work patterns.
OPERATION
Note: The battery is partially charged. To ensure proper operation of the power tool,
the battery must be fully charged before first use.
EN
20 V; 2 Ah, Li-Ion (RB-2001)*
1- 1,5 h
Input: 100 – 240 V; 50/60 Hz
Output: 21 V; 2,2 A
Up to 10 mm
1,3 J
5000 ipm
900 rpm
10 mm
8 mm
16 mm
1,25 kg
SDS chuck, user's manual
88 dB(A), K= 3 dB(A)
PA
99 dB(A), K= 3 dB(A)
WA
(drilling without
8,9 m/s
h
K=1,5 m/s
2 2
38