Philips SilentStar FC9309 Manual De Instrucciones página 10

EngliSh
10
4222.003.3431.1.indd 10
attaching the nozzle and accessories
1 To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the floor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle ('click').
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2 To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.
hose
1 To connect the hose, push it firmly into the appliance ('click').
Note: Make sure that the projection of the hose fits into the recesses.
2 To disconnect the hose, push the buttons (1) and pull the hose out
of the appliance (2).
telescopic tube
Note: Adjust the length of the tube so that the hand holding the handgrip is at
hip level.
11-11-09 15:27