DeWalt DCF896 Traducido De Las Instrucciones Originales página 41

condition. Inspect accessories prior to use to ensure that
they con tain no cracks.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Table 1
Customizable Features
Worklight brightness
Worklight delay off
Maximum speed, forward (RPM)
Maximum speed, reverse (RPM)
Precision Wrench™ hesitation (seconds)
Impact time limit (seconds)
Precision Tap™
Table 2
suggested Tapping speeds for aluminum/soft Materials
mm
19
17
16
14
13
10
8
1 2
Home Mode 1
High High
20 secs 20 secs
0–2000 0–900
0–2000 0–2000
Disabled Disabled
Disabled Disabled
Disabled Disabled
3 4 5
Impacting Speed
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
Factory Presets
Precision Wrench™
Mode 2 Mode 3
High High
20 secs 20 secs
0–2000 0–2000
0–2000 (impacting) 0–2000
0–900 (removal)
0.5 Disabled
Disabled Disabled
Disabled Disabled
6 7 8
EnGLIsh
Customizable Range
OFF–High
0–20 minutes
0–2000
0–2000
0–2
0.25–10
Off/Tapping/Advanced
(Refer to Table 4)
9 10
39