ECRON COSMO 1252421 Manual De Instrucciones página 49

• Ensure that you disconnect the electrical current from the
fuses or automatic input circuit breaker (thermal cutout)
before wiring or inspecting the fan, in order to avoid electric
shock.
• All the connections must comply with Electricity Standards
and the appliance must be grounded in order to avoid
electric shock.
• We recommend that installation is carried out by a
qualified technician who can test the resistance of the roof
supporting the fan and who will make correct electrical
connections.
• The fan must be connected to an omnipolar switch with a
minimum distance of 3mm between contacts.
EN
• Do not use the fan if the blades are cracked or damaged.
• Do not spray with nebulisers/ sprays (insecticides, lacquers,
etc...). This could damage the appliance.
• To minimise any risk of fire or electrocution, do not use the
fan with a speed controller, a frequency converter, an electric
programmer or any other device that can operate the fan
automatically.
• In the event of abnormal situations, turn off the appliance
immediately and contact the seller.
49