Remote Control - ECRON COSMO 1252421 Manual De Instrucciones

REMOTE CONTROL

The remote control is provided with 2 batteries R6 (AA), 1.5 V each.
- Remove the cover from the battery compartment located
at the back of the remote control.
- Insert the batteries according to their polarity (following the
symbols + and –) .
- Replace the battery compartment cover.
The remote control is used to switch the fan on and off
(Figure 1).
(Figure 1)
1. FAN SWITCH-ON To switch the fan on,
press button "0" and then release it. To switch
the fan off, press button "0" again and then
release it.
2. SPEED The fan speed can be adjusted to
the desired level: 1 - low speed, 2 - medium
speed or 3 - high speed. To do so, press the
corresponding buttons and then release
them.
3. LAMP SWITCH-ON To switch the lamp on,
press the button located at the top left and
then release it.
4. LAMP SWITCH-OFF To switch the lamp
off, press the button located at the top right
and then release it.
EN
57