E - Using The Product Ona Smartphone - Avidsen IPC280-i Manual De Instrucciones

720P HD WiFi iP camera
d - CONFigurATiON
4 The calendar allows you to programme
the times the camera is allowed to send an
email when motion is detected. Click to
activate (blue box) or deactivate (white box)
the desired times.
Click on "Alert", "Détection de mouvement
[Motion detection]":
3 4
1 Motion detection zone: all movements in this
area will trigger an alert.
2 Activation of detection zone 1. Click to
activate motion detection. By default, zone 1
covers the whole screen.
3 Detection sensitivity for zone 1: When it is set
to the minimum value, only a major change in
the image will trigger an alert. When it is
set to the maximum value, the slightest
movement within the zone will trigger an alert.
4 Zones 2, 3, 4: you can draw other zones on
the screen and give them different sensitivities.
5 IMPORTANT: When you have finished
configuring the device, do not forget to click
on "Save" at the top of the screen to confirm the
entries you have made.
This completes the configuration. From now on, any
motion detected by the camera in the zones and
at the times you have specified will trigger an email
alert.
1 2
5
E - uSiNg THE prOduCT ON
A SMArTpHONE
The free application used to control, configure and
view the cameras remotely on your smartphone
is available from the Appstore and Google Play.
Download, install and run the "AvidView" app.
Although we have described how the Android app
works here, the same applies to the iPhone.
Launch the application on your smartphone or
tablet, then click on the
"Ajout manuel caméra [Add manual camera]"
at the bottom of the screen, then on the icon
. This will activate the phone's camera so that you
can scan in the QRCode.
Important note: the code scan works more
effectively when the code is positioned above the
red line on the screen.
Next, enter the name you want to give your camera
and its password. Tick the default password box
if you use the default password (you will be asked
to change it to improve security). The ID for your
camera is not requested here.
icon. Then click on
en
11