Avidsen IPC280-i Manual De Instrucciones página 33

720P HD WiFi iP camera
Symptoms
Poor quality or shaky image
Motion detection is triggered
unnecessarily
1 - GENERAL CHARACTERISTICS
Power supply
Network interface
Wireless network interface
Optical sensor
Minimum luminous intensity
Night vision
Lens
Buttons
Video compression
Resolution
Audio
Operating temperature and
humidity
Storage temperature and
humidity
Possible causes
Incorrect video settings
Unsuitable motion detection
settings
i - TECHNiCAL ANd LEgAL iNFOrMATiON
5VDC / 2000mA
Ethernet 10/100, audio-MDIX, RJ45
IEE 802.11b/g/n
¼'' cmOS
0 lux
Manual or automatic (dusk-to-dawn sensor) - Range: 10m
F: 2.8mm. Angle of view: 70°
Reset button: restores factory settings
H.264
Primary stream: up to 1280x720 pixels
Secondary stream: up to 640x352 pixels
Built-in microphone and loudspeaker for two-way audio
communication
0°C to 40°C, 20% to 85% RH, non-condensing
For indoor use only
-10°C to 60°C, 0% to 90% RH, non-condensing
H - FAQ
Solutions
Test the "flux secondaire
[secondary stream]" to confirm,
check the video settings and
reduce the quality if necessary
Reduce the trigger sensitivity or
limit the area being covered
en
15