Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-one HIDDEN CAMS (1F) into the ENDS (A
å
and B), SHELF/BOTTOMS (D), and DRAWER BRACE (M64).
Then, insert the metal end of twelve CAM DOWELS (2F)
into the HIDDEN CAMS, except the long edges of the
ENDS (A and B) and the DRAWER BRACE (M64).
Do not insert CAM DOWELS into these edges.
Arrow
1F
Page 6
Do not tighten the HIDDEN CAMS in this step.
Arrow
2F
(12 used)
(21 used)
B
A
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
418662
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1217
to watch a video on how to assemble your unit.
Do not insert CAM DOWELS into this part.
1F
D
D
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
M64
Arrow
www.sauder.com/services
Publicidad
