Tabla de contenido
Publicidad
ASSEMBLY INSTRUCTIONS
4.
Remove the stopper (D) and the
pop-up body (H). Screw the nut (G) all the way down
onto the pop-up body (H) and then push the gasket (F)
down.
5.
Apply silicone sealant (not included) to the underside of
the
(E).
6.
Insert the pop-up body (H) into the sink and screw the
(E) onto the pop-up body (H). Ensure the pivot
hole is facing the back of the sink. Tighten the nut (G)
and remove the pivot nut (I).
(E) from the
4
5
6
5
D
E
F
G
H
E
G
Lowes.com
E
I
H
Publicidad
Tabla de contenido
