Anker NEBULA Cosmos Max Manual Del Usuario página 7

EN
[Auto]: Automatically detects whether the projector is inverted.
Automatically switch between these options.
[Front Projection]: The projector is located in front of the
projection surface.
[Rear Projection]: The projector is located behind the
projection surface.
[Projector Mode]
[Inverted Front Projection]: The projector is hanging from
the ceiling in an upside down position. The image is
rotated by 180 degrees.
[Inverted Rear Projection]: The projector is hanging
from the ceiling in an upside down position behind the
projection surface. The image is rotated by 180 degrees
and horizontally mirrored.
[Picture Settings]
[Standard] / [Movie] / [Office]
[Picture Mode]
Note: When selecting a different mode, color brightness,
contrast and advanced color settings differ.
[Brightness]
Adjust color brightness between 0 and 100%
[Contrast] Adjust color contrast between 0 and 100%
Advanced Settings Adjust color Saturation, Hue, Gain and Gamma
Back to Default Press Enter to back to the default setting
5. Apps
① On the home page, select
> [Apps], and press
② Select an app and check the current version, open or force stop, check the storage
used, clear data or cache, or enable or disable notifications and permissions.
6. Others
On the home page, select to find more setting options.
[Device Preferences]
[About] Check the device information and firmware update.
[Date & time] Manually set the date and time.
11
.
[Language] Select the on-screen language.
[Keyboard] Select the keyboard language type.
[Sound] Select the audio output source and sound format.
[Storage] Check the device storage and removable storage.
[Reset] All data from your device's internal storage will be erased.
[Date & Time]
[Automatic date & time] Enable or disable automatic date and time.
[Set date] Manually set date.
[Set time] Manually set time.
[Set time zone] Set a time zone.
[
Use 24-hour format] Enable or disable 24-hour format.
EN
12