Metra 99-7521B Instrucciones De Instalación página 6

ISO DIN head unit provisions
1. Mount the pocket to the brackets
using the supplied (4) #8 x 3/8" Phillips
screws. (Figure A)
2. Mount the radio to the pocket/brackets
with the screws supplied with the unit.
(Figure A)
3. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the unit for proper
operation.
4. Mount the radio/pocket assembly into
the dash. (Figure B)
5. Install the radio trim panel over the
radio/pocket assembly and reassemble
dash in reverse order of disassembly.
Kit Assembly 99-7521B
6
(Figure A)
(Figure B)