Publicidad
Step 6
Step
First, fi ll the holes in the LEFT END (B2) 1/4 to 1/2 full with GLUE (54M).
å
Then, insert the WOOD DOWELS (15F) in the FRONT PANEL (G2) into
the holes in the LEFT END. Wipe away the excess GLUE.
Fasten the LEFT END (B2) to the BOTTOM (F) and SHELF (H). Tighten
å
four HIDDEN CAMS.
Fasten the RAIL (K) to the LEFT END (B2). Use a BROWN 7/16" LARGE
å
HEAD SCREW (6S).
Insert four METAL PINS (1R) into the UPRIGHT (C).
å
Insert the METAL PINS (1R) in one end of the
å
UPRIGHT (C) into the holes in the SHELF (H).
Curved edge
1R
BROWN 7/16" LARGE HEAD SCREW
(1 used for the METAL BRACKET)
Page 10
Finished edge
C
H
54M
B2
S u r
f a c
H I D
e w
D E N
i t h o
u t
C A
M S
6S
K
G2
15F
F
Maximum
210 degrees
Minimum
190 degrees
416128
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Arrow
www.sauder.com/services
54M
Publicidad
