Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INTRODUCTION
WARNING!: This unit is intended for professional use. Read de instructions in this manual before using the device.
!
This device is meant to function as a remote display associated to a U·meter, Uvalve or U·count unit.
• The U·view unit is intended to be integrated into a fluid monitoring system.
• Use this device only for the purposes for which it is intended.
• This device has not been approved for being used in commercial transactions.
• Do not alter or modify this unit.
DESCRIPTION
Nº
DESCRIPTION
1
LED screen
2
Selection button
3
Reset button
4
Status LEDs
5
Wiring connections
6
Holes for equipment installation in
accessories or mount bracket
7
Holes for flush mount installation in work-
shop furniture
SCREEN DISPLAY MODES
The device has 3 screen display modes, named "standby
mode, "standard" mode and "XXL" mode.
The "standby" mode (figure 1) is the display mode shown
when no transaction is in progress. While a transaction is
being made, the screen will show the "standard" mode
(figure 2) or the "XXL" (figure 3) according to the device
configuration (see the "menu configuration" section for
more details).
Depending on the screen mode, the unit address (1), the
fluid volume dispensed (2), the progress status bar of the
transaction (3) or the indicator which shows that the
solenoid valve is open (4), will be displayed.
1
2
838 850 R. 06/18
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
fig. 1
3
1
6
Ø4 self-tapping screw
1
4
fig. 2
2
4
2
3
5
CAN 1
SV 1
SV2
PULSER
CAN 2
7
2
fig. 3
Publicidad
Tabla de contenido
