Troubleshooting; Warranty - amzchef BD7504S03 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

TROUBLESHOOTING

Warranty & Service
FAQs and Troubleshooting
On no account open the appliance housing!
Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict
accordance with current national and local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for
unauthorised work. Ensure current is not supplied until after maintenance or repair work has been carried out.
Problem
The oven does not heat up
A noise can be heard after a
cooking programme
The lighting is not working
Cakes and biscuits are
browning unevenly

WARRANTY

Dear Customer,
Thank you for choosing AMZCHEF product. We sincerely hope that you are satisfied with it.
The manufacturer's warranty covers the product for a period of 24 months from the date of purchase against
manufacturing faults. All warranties are automatically kept track of in our system, so there is no need to register your
product.
For an extra 1 year's free warranty, please register at our official website www.iamzchef.com or fill in following
Warranty Card, take picture and send to info@iamzchef.com.
Agent/Distributor is welcomed to contact us. Email:info@iamzchef.com.
Possible cause and remedy
- The oven may not be switched on. Switch the oven on.
- The clock may not be set. Set the clock.
- Check to see if the required settings have been applied.
- A household fuse may have blown or a circuit breaker may have
tripped. Replace the fuses or
reset the circuit. If this happens repeatedly, call an authorized
electrician.
The cooling fan remains switched on after the end of a cooking
programme.
- Disconnect the appliance from the electricity supply:
Switch off and unplug at the socket, or disconnect the fuse, or switch
off at the isolator as appropriate.
- Turn the glass cover counterclockwise.
- Remove the light and replace it with the same type.
- After replacing the light, screw the glass cover clockwise.
There will always be a slight unevenness. If browning is very uneven
check that the correct
temperature was set and that the correct shelf level was used.
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cof6001

Tabla de contenido