Adjusting The Delay Between The Picture And Sound; Enjoying Multiplex Broadcast Sound (Audio) - Sony HT-A7000 Manual De Instrucciones

Adjusting the Delay
Between the Picture and
Sound
When the sound does not match the
pictures on the TV screen, you can adjust
the delay between the picture and
sound.
The setting method differs depending
on the input.
For details, refer to Help Guide.
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the speaker system
receives a Dolby Digital multiplex
broadcast signal.
1
Press AUDIO repeatedly to select
the desired audio signal.
The audio signal appears
screen
.
Audio signal
[Audio:
Main]
[Audio: Sub]
[Audio:
Main/Sub]
Notes
• To output Dolby Digital sound, you need
to connect a TV that is compatible with
eARC or ARC (page 18) to the HDMI OUT
(TV (eARC/ARC)) jack with the HDMI cable
(supplied), or other devices to the HDMI IN
1 or HDMI IN 2 jack with an HDMI cable (not
supplied).
• If your TV's HDMI IN jack is not compatible
with eARC or ARC (page 18), connect the
TV to the TV IN (OPT) jack with an optical
digital cable (not supplied) to output
Dolby Digital sound.
AUDIO
on the TV
Explanation
Sound of the main
language is output.
Sound of the sub
language is output.
Main sound is output
from the left speaker
and sub sound is
output from the right
speaker.
39
US