ARDES 440 Folleto De Instrucciones página 9

Instructions for use
POSITIONING
Insert the removable foot support in the appropriate spaced based on the
preferred position (horizontal or vertical).
To remove the foot, firmly grasp the tab and extract the foot.
INDICATIONS FOR USE
The appliance can emit both cold air and hot air depending upon the
function selected by means of the function switch.
0 = off
Fan = cold air
I = hot air
II = very hot air
Make sure that the function switch is in the OFF position before
connecting or disconnecting the appliance.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch in the desired position and turn the temperature switch
clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
Make sure that the appliance has cooled down completely before storing
it in the box.
GB
9