Installation Instructions - allen+roth 1212VA-42-201 Manual De Instrucciones

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Installation Time: 20-30 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit
Helpful Tools (not included): Measuring tape, level

INSTALLATION INSTRUCTIONS

1. To remove drawer preassembled in vanity (A),
fully extend drawer. Locate plastic levers on
metal glide tracks at left and right sides of
drawer box and push on plastic levers on both
sides at the same time to disengage drawer
box from the glides. Gently lift the drawer
up to remove it from vanity (A).
1
3
A