Troubleshooting; Maintenance - Panphonics AA-160 Basic Manual Del Usuario

Product label of AA-160 Basic amplifiers

6. TROUBLESHOOTING

If the sound cannot be heard,
• Make sure that the Power Supply is
connected to the amplifier and the
power switch is turned ON (Green
LED stays on)
• Make sure that the amplifiers volume
level is not at its minimum level. If
Red LED turns on the volume level is
too high
• Make sure that all the cables have
been connected correctly and the
media player is turned on and it is
functioning properly. If the media
player has it´s own volume control,
make sure the volume has been set
If the sound volume is too low,
• Makes sure that the media player's
volume level is set higher (still
adjusting the amplifier's volume
level to an appropriate level, so that
Red LED does not turn on)
• Please note that the media player's
output capacity affects the amplifier's
final audio output

7. MAINTENANCE

The equipment is turned off by turning
the power switch OFF and removing
the power supply unit from the mains
socket. Notice that disconnecting the
power plug only from the AA-160 does
not disconnect the main power from the
power supply unit. The Panphonics
Sound Shower does not need periodical
maintenance.