Blumfeldt Fiamme Scoppi Manual Del Usuario página 35

EN
Only use the extinguishing tool supplied with this appliance, never use a
timber or plastic tool and never use your bare hands. Pulling the plate towards
the front of the burner will reduce the fl ame height - and reduce the heat
output.
To turn off the fi re, pull the damper plate briskly to the front of the burner and
the fi re will extinguish. If the fi re does not shut down, reopen the damper plate
and repeat the shutdown procedure. Pushing the plate towards the back of the
burner will increase the fl ame height and increase the heat output.
After lighting the fi replace, allow approximately 15 minutes for the burner to
achieve effective working temperature. The burner is at working temperature
when the fl ames are full and mostly yellow in appearance.
Push to open Pull to close
35