Special Safety Instructions - Würth SOLID 24 l OILFREE Traducción Del Manual De Instrucciones De Servicio Original

d) Keep unused devices out of the reach
of children. Never allow persons who
are unfamiliar with this type of device
to use it, nor anyone who has not read
these instructions. Devices are dangerous if
used by inexperienced persons.
e) Maintain devices and accessories with
care. Check that moving parts are
working correctly and do not jam, and
that parts are not broken or damaged
such that device operation would be
impaired. Damaged parts must be
repaired before the device is used.
Many accidents result from poorly maintained
devices.
f) Use device, accessories, accessory
tools and so on in accordance with
these instructions. In doing so, take
into account the conditions of work
and the activity to be performed. The
use of devices for applications other than those
intended can result in hazardous situations.
The following residual hazards are always present
with compressed air devices and cannot be com-
pletely eliminated by safety devices:
Risk of injury due to escaping com-
pressed air and parts which may be
swept up with the compressed air!
▸
Never direct the compressed air directly at
people or animals.
▸
Ensure that all compressed air devices and ac-
cessory parts used are designed for the working
pressure or are connected via pressure reducers.
▸
When undoing the quick-release coupling, be
aware that the compressed air contained in the
air hose may suddenly escape. Therefore hold
the end of the air hose that is being released
firmly.
▸
Ensure that all screw connections are always fully
tightened.
▸
Do not repair the device yourself. Only special-
ists may repair compressors, pressure tanks and
compressed air devices.
General safety instructions
g) Keep the handles and gripping
Service
a) All repairs to the device must be car-

Special safety instructions

Risk of burns caused by the hot sur-
faces of compressed air transporting
parts!
▸
Risk of injury and crushing on moving
parts!
▸
▸
▸
surfaces dry, clean and free from oil
and grease. Slippery handles and gripping
surfaces prevent safe operation and impede
control of the device in unforeseen situations.
ried out by qualified specialist techni-
cians and with original spare parts
only. This will ensure the continuing safe
operation of the device.
Allow the device to cool down before any main-
tenance work.
Do not operate the device without security equip-
ment being fitted.
Recall that the device will start up automatically
once the minimum pressure is reached. Before
starting maintenance work, ensure that the device
is disconnected from the mains.
Ensure that when switching on (e.g. after main-
tenance work) there are no longer any tools or
loose parts in the electrical equipment.
17