Hesperide 165677 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Protection of the screws and bolts and the structure
Steel is a material that exposed to external elements (humidity, salty winds) will naturally oxidise. To prevent
the appearance of rust, our steel furniture is delivered original with an Epoxy treatment. However this layer
gradually disappears under the effect of external elements and must be renewed regularly. For this, apply an
anti-rust aerosol at least once at the beginning and end of the season (available in hardware shops or DIY
shops). Increase the treatment frequency every 3 months for furniture exposed to salty sea winds.
The screws and bolts must also be the subject of such a treatment.
If the rust appears despite all that, it can easily be treated and removed with the usual products such as
white vinegar or citric acid. A cloth soaked with car polish can also allow you to remove the rust spots. Finish
with an anti-rust spray to protect the furniture, to apply regularly.
Repairing the synthetic resin
Synthetic resin is a supple but hardwearing synthetic material. During its life, a strand may be deformed,
even flayed. There is no risk of this graze from spreading. Use a hairdryer ten or so centimetres away to heat
the strand to soften it and put it back in place (do not apply the hairdryer to the strand itself).

Publicidad

Tabla de contenido
loading

Tabla de contenido