Turn Burner(S) Off; Selecting Cooktop Settings; How To Synchronize Left Elements - GE PP9030 Manual Del Propietário

Ocultar thumbs Ver también para PP9030:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turn Burner(s) Off

Touch On/Off pad for an individual burner or touch the
All Off pad.

Selecting Cooktop Settings

cooktop has its own power levels ranging from low to
depending on the cookware being used, the type and
quantity of food, and the desired outcome. In general
use lower settings for melting, holding and simmering
and use higher settings for heating quickly, searing
and frying. When keeping foods warm confirm selected
setting is sufficient to maintain food temperature above
140°F. Larger elements and elements marked "Keep
Warm" are not recommended for melting.

How To Synchronize Left Elements

To Turn On
Hold the Sync Burners pad for about half a second
to connect the two burners. Operate either element as
described on page 7 to adjust power level.
49-80747 Rev. 2
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after the initial 10
minute cycle by pressing the + pad.
CAUTION
cookware, utensils or leave excess
water spills on control key pads. This
may result in unresponsive touch
pads and turning off the cooktop if
present for several seconds.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pp9036

Tabla de contenido