Environmental Protection; Declaration Of Conformity - Bosch GWS 6-100 E Instrucciones De Servicio

2 609 140 081 - Buch Seite 7 Dienstag, 20. Januar 2004 8:52 08
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for en-
vironmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Service and Customer
Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service +44 (0) 18 95 / 83 87 82
............................
Advice line +44 (0) 18 95 / 83 87 91
....................
Fax +44 (0) 18 95 / 83 87 89
.............................................
19 • 2 609 140 081 • TMS • 15.01.04
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Fax
Australia
Robert Bosch Australia Ltd.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
To be fitted
Fax
by qualified
professional only
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
Fax
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 7
Service +353 (0)1 / 414 9400
...................................
+353 (0)1 / 459 8030
....................................................
+61 (0)1 / 800 804 777
...............................................
+61 (0)1 / 800 819 520
...............................................
+64 (0)9 / 47 86 158
.....................................................
+64 (0)9 / 47 82 914
.....................................................

Declaration of Conformity

Dr. Eckerhard Strötgen
Head of Product
Certification