PC Display
Setting Up Your PC Software (Based on Windows XP)
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode
IBM
VESA
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI does not support PC function.
The Windows display-settings for a typical computer are shown below. The actual screens on your
PC may be different depending upon your particular version of Windows and your particular
video card. Even if your actual screens look different, the same, basic set-up information will
apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on "Control Panel" on the Windows start menu.
2.
When the control panel window appears, click on "Appearance and Themes" and a display
dialog-box will appear.
3.
When the control panel window appears, click on "Display" and a display dialog-box will
appear.
4.
Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum-
If a vertical-frequency option exists on your display settings dialog box,
the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
Resolution
Horizontal
Frequency (kHz)
720 x 400
31.469
640 x 480
31.469
640 x 480
37.861
640 x 480
37.500
800 x 600
37.879
800 x 600
48.077
1024 x 768
48.363
1024 x 768
56.476
1024 x 768
60.023
1280 x 1024
63.981
1280 x 1024
79.976
1440 x 900
70.635
Vertical
Frequency (Hz)
70.087
59.940
72.809
75.000
60.317
72.188
60.004
70.069
75.029
60.020
75.025
74.984
English-22
1440 x 900 @ 60Hz
Pixel Clock
Sync Polarity
Frequency (MHz)
28.322
25.175
31.500
31.500
40.000
50.000
65.000
75.000
78.750
108.00
135.00
136.75
(H/V)
- / +
- / -
- / -
- / -
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / +
- / +