Selecting The Source; Editing The Input Source Names; Teletext Decoder - Samsung LE23R3 Instrucciones Del Propietario

Selecting the Source

Editing the Input Source Names

Teletext Decoder

You can select among external sources connected to
your TV's input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Input".
2. Press the ENTER button again, to select "Source List".
When no external device is connected to your set, only "TV", "Ext.1", "Ext.2"
are activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI"
are activated only when they are connected to your set.
3. Select the required device by pressing the
Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available
source. TV mode can be selected by pressing the TV or P
remote control but you cannot select it by pressing the SOURCE button.
Name the device connected to the input jacks to make your input
source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Input".
2. Press the or
button.
3. Press the or
Press the ENTER button.
4. Press the or
Press the ENTER button.
5. Press the EXIT button to exit.
Most set channels carry " Teletext ", pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The Teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
English-17
button to select "Edit Name", then press the ENTER
button to select the device that you wish to edit.
button to select the required device.
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
or button.
/ button on the