Descargar Imprimir esta página

Denver TCM-230C Instrucciones De Operación página 39

Reproductor portatil de cd y mp3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
3. Press
PLAY/PAUSE to control PLAY/PAUSE mode, Press repeatedly, to shift between play and pause.
4. Turn Volume knob to adjust the sound volume.
5. Press (SKIP+ FOLDER+) to play next track, hold (SKIP+FOLDER+) to fast forward search the current track.
6. Press (SKIP- FOLDER-) to play previous track, hold (SKIP- FOLDER-) to fast backward search the current
track.
7. Press
STOP key to stop playing.
8. Press MODE to select the repeat mode when playing a CD disc. ( REP
9. Press MODE to select the repeat mode when playing MP3.When the player is stoped in MP3 mode, press and
hold the MODE key for 3 seconds to enable selection of folders, press
FOLDER-) to select the folder, the LCD flickers.
Then press MODE.( REP
REPEAT
Press REPEAT once- the indicator lights up and flash: A single track is played repeatedly. Select a track with
Press REPEAT twice- the indicator lights up: All tracks are played repeatedly.
PROGRAM
In stop state, press PROGRAM and use skip/search to select the track repeat until done then press play to start
program play. the programmed memory is 99 tracks.
NOTE
Do not use irregular shape CDs(example: heart-shaped, octagonal ones). It may result in malfunctions.
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment during play.
Do not touch the lens. Doing so may cause malfunctions.
Press and hold the PRQG button to cancel the programming.
F TUNER OPERATION
1 Select a Function with to FM.
2 Tune to a station with TUNING.
3 Turn VOLUME to adjust the sound.
G GENERAL
If an erroneous display or malfunction occurs, disconnect the DC cord and remove all the batteries to turn off the
display. Then turn the power back on.
The LCD display can change to blue or orange.
H SPECIFICATIONS
Tuner section
Frequency range:
FM: 88-108 MHz
CD player section
Disc:
Compact disc
Scanning method:
Non-contact optical scanner
(semiconductor laser)
Specifications and external appearance are subject to change without notice.
All manuals and user guides at all-guides.com
ALBUM
RND
GB-4
(SKIP+ FOLDER+) or
NORMAL) then press PLAY.
General
Speaker:
66 mm cone type (2)
Power output:
0.8W x2 RMS.PMPO. 40W
Power requirements:
AC: 230V
Weight:
1.2Kg (excluding batteries)
Dimensions:
Accessory:
RND
NORMAL)
(SKIP-
DC: 9V(1.5x6c)
200(W)x125(H)x250(D) mm
or
.

Publicidad

loading