Descargar Imprimir esta página

Panasonic CS-E10HB4EA Instrucciones De Operación página 7

Ocultar thumbs Ver también para CS-E10HB4EA:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
TO SELECT FAN SPEED
(5 OPTIONS)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
AUTO
TO ADJUST AIRFLOW DIRECTION
AIR SWING
MANUAL
AIR SWING – AUTO
AUTO
• The vertical airfl ow louver
swings up and down
AIR SWING
automatically.
• In heat mode, the air blows
horizontally for a while, then
starts to blow downwards.
AIR SWING – MANUAL
AIR SWING
• The airfl ow direction can be
adjusted as desired by using
MANUAL
remote control.
• Do not adjust the vertical
airfl ow direction louvers by
hand.
• The air is discharge evenly
through 4 output vents.
TO ACHIEVE TEMPERATURE
QUICKLY
QUIET
TO ENJOY QUIET
ENVIRONMENT
• This operation reduces airfl ow noise.
QUIET
and
can be activated in all modes
and can be cancelled by pressing the respective
button again.
QUIET
and
can not be selected at the
same time.
TO SET THE TIMER
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
Select ON or
Set the time.
OFF timer.
• To cancel ON or OFF timer, press
press
.
CANCEL
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control Preparation at back
cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
SET
resumed) by pressing
OPTIONAL SETTINGS
OPTIONAL SETTINGS
Press and hold for approximately 10
seconds to show 12-hour (am/pm) or
CLOCK
24-hour time indication.
Press to restore the remote control's
default setting.
RESET
Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
2
SET
Confi rm.
ON
or
then
OFF
.
7

Publicidad

loading