Connecting To Your Tv - Samsung HW-J6000R Manual Del Usuario

5. While the subwoofer's indicator is flashing blue, press the
the Soundbar main unit to turn on the Soundbar main unit.
6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c For further information, refer to the Web Manual.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 12 for instructions.
Method 1. Connecting with a Cable
Check the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
HDMI OUT
(TV-ARC)
Bottom of Soundbar
1. Connect the HDMI cable as in the picture above.
2. TV ARC appears on display of the product and TV sound is output.
c If TV sound is not output, press the
remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to
TV ARC and TV sound is output.
c If the Soundbar main unit display does not change to TV ARC, check the cable connections.
c You can conveniently control the volume of the Soundbar and interlock power supply.
button on your remote control or on the top of
HDMI Cable
HDMI IN
(TV-ARC)
Check the (TV-ARC) at
HDMI IN port of your TV.
TV ARC
button on the top of your Soundbar or the SOURCE button on the
· 6 · English
Soundbar