Technical Data - Rexel Duo Manual De Instrucciones

Technical data

Cutting Type
Shred Size
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Please read this instruction leaflet carefully before use.
Introduction
Thank you for choosing this shredder from Rexel. We are sure it will serve
you well, but please take a little time to read these instructions to ensure
you get the best out of your machine.
Safety First
• Please store this instruction manual in a safe place for future reference.
• Do not operate the shredder unless it is located on the waste bin provided.
• Please pay close attention to the safety symbols on the top of the
shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the power socket and
use a damp cloth. NB. Do not use any cleaning products to clean the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at
which it was purchased if...
- The power cable or plug is broken.
- The shredder doesn't operate despite following the guidelines in the
manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the requirements of
the machine (230V~50Hz).
• To avoid risk of injury, don't open the machine's casing to attempt DIY
repair. Any attempted repair by an unqualified person will invalidate the
warranty.
Warranty
The product is guaranteed for 24 months from the date of purchase –
please return the unit to your retailer if you experience any problems. This
does not affect your statutory rights.
4
Rexel Duo
Confetti Cut
4mm x 45mm
10 sheets
220mm
H370 x W340 x D230mm
230V~50Hz
2.1 amps
m
Lights and Icons Explained
Colour of LED
Power Off Position
Auto Mode
Forward Mode
Reverse Mode
Cool Down Indicator
Description of product parts
U Important Safety Symbols
A
U Paper & Credit Card slot
B
U CD entry slot
C
U Power cable
D
U Bin
E
U Slide switch
F
U CD Bin
G
Preparation before use
How to use the shredder correctly:
• Take care not to insert fingers, ties or other objects into the entry slot of
the shredder.
• We recommend to remove staples and paperclips, avoid laminating
materials, plastic bags etc. from being passed through the shredder. This
will prevent damage to the cutters.
• Do not shred wet paper as it can tangle in the cutters.
• Do not shred more than 10 pieces of paper in one pass.
• Do not shred more than 200 sheets of paper at any one time. Running the
unit for too long may make the motor overheat. If the motor over heats,
allow it to cool down for at least 45 minutes before resuming use.
• Do not use the reverse ( ) function if it's not necessary.Over use of the
reverse ( ) function can result in shredded paper becoming jammed in
the entry slot, which will adversely affect the performance of the shredder.
• Unplug the product before moving or emptying the shredder basket.
Correct operating procedure
1 Insert plug (D) into the AC power socket.
Slide the switch (F) to the AUTO position (
2
3 When not in use, slide the switch to the
Empty the waste basket regularly to ensure the shredder exit does not
4
become blocked with paper.
LEDs
1 2
Power On Cool Down
Green Red
light
light
light
light
)
(off position).