ARDES ARTK45A Guia De Inicio Rapido página 6

The cooler is not suitable for continuous work. Ice could form on the aluminium cooling plate. You are advised to
switch off the appliance after 6 days consecutive work. The cooler box can be re-operated after 2 hours.
Keep the casing dry because condensate could form.
When used with a 12 V power supply, pay attention not to frequently switch on/off the car engine, so the
refrigerator box is not constantly shut-off. If the appliance is used with the engine off, the car engine could go
flat.
Connect the power cable to the connector plug corresponding to the connection function you desire (home or
car connection).
Operation at 230V
During operation with a 230 V power supply, the cooling capacity is controlled by the
switch ECO/MAX.
ECO POSITION: the refrigerator consumes less energy and complies with the
parameters of efficiency class A; the internal temperature reaches 8°C less than the
ambient temperature.
MAX POSITION: the appliance works at maximum cooling capacity; the inside of the
casing reaches up to 14°C less than the ambient temperature.
Operation at 12 V
ATTENTION! The switch to adjust cooling capacity does not work during use at 12 V.
During operation with cooling at 12 V, the appliance always produces a difference in
temperature compared to the ambient temperature up to 14° C.
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
It is best to store the appliance with the lid open if it is not being used.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
6
InstructIons for use
MAIntenAnce
ECO MAX
12V
DC
30V
AC