Samsung DVD-P450 Manual De Instrucciones página 9

Rear Panel
1. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
- If Component(P-SCAN) Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan(P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
TV's menu system.
- If Component(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not w
- See pages 53 ~ 54 to get more information on how to use the setup menu.
S
E T U P
1
1 3
, P and Y video.
R B
2
4 5
4. VIDEO OUT JACK
- Use a video cable to connect to the Video inpu
your television.
- The Video Output in Setup Menu must be set t
COMPOSITE/S-VIDEO.
5. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to th
S-Video jack on your television for higher pictu
quality.
- The Video Output in Setup Menu must be set t
COMPOSITE/S-VIDEO.
ENG-9 ENG-9