Adding Cameras From The Lan - Lorex N863 Serie Guia De Inicio Rapido

Adding cameras from the LAN

Follow the steps below to add cameras that are not directly connected to the Power over Ethernet
(PoE) ports on the back of the recorder.
To add cameras from the LAN:
1. Connect the camera to a router or switch on the same network as the recorder.
2. Right-click and then click Camera Registration.
3. Enter the system user name (default: admin) and password.
4. Configure the following:
a. Check the camera(s) you would
like to add.
b. Click Add. The status indicator
turns green to show the camera
is successfully connected.
c. The added device(s) will appear
in the Added Device list.
d. If the icon in the Status column
appears red, there may be a
password issue with the camera.
Select the camera and click
Reconnect IPC.
a
c
b
d
12