Initial Use/Charging Process - Beurer cellulite releaZer compact Instrucciones De Uso

Function light status
Function lights flash in a circle
Function lights illuminate continuously
The left and right function lights flash
alternately

7. Initial use/charging process

Note
Before using the cellulite releaZer compact for the first time, let it charge for
a minimum of 3.5 hours. Proceed as follows:
• Connect the charging cable to the mains adapter and the cellulite releaZer
compact (Figure 1). Then insert the mains adapter into a suitable socket.
Alternatively, you can also charge the cellulite releaZer compact with the
charging cable via the USB port on your computer or laptop (Figure 2).
When the device is charging, the function lights flash in a circle. When the
cellulite releaZer compact is fully charged, the function lights illuminate con-
tinuously. If the left and right function lights flash alternately during operation,
you have to charge the cellulite releaZer compact.
Charging function
(charging cable plugged in)
Charging
Charging complete
Low battery
33