Important Safety Precautions - ACME SS209 Manual Del Usuario

GB
1. Power
2. LED indicator
3. Volume
4. Bass Control
5. Audio output
Installation
1. Be sure that all components are switched off before connecting.
2. Connect both satellite speakers to the "Audio output" jack on the back of the subwoofer.
3. Insert jack of signal cable into the sound output port of your PC, MP3 player and so on.
4. Plug the AC cable into a power socket.
5. Revolve "Volume" regulator knob to the minimum and then switch the speaker system by
pressing "POWER" knob, the LED lights up.
6. Adjust the volume knob to a desirable, necessary volume.

Important Safety Precautions

1. For the best results, place your speakers on a solid, flat surface when in use.
2. Do not place speakers on an unstable cart, stand, tripod, bracket or table.
3. Do not touch the metallic portions of your connector cables.
4. In order to avoid potential electric shock or other such accidents, do not dismantle or take apart
the speakers or their components.
5. Keep the volume tuned to the lowest setting before powering your speakers on. Once powered,
proceed to raise the volume to a reasonable level.
6. Do not expose your speakers to excessive amounts of heat or cold. Keep them in a well-
4