Remington PRO-Luxe Manual Del Usuario página 4

ENGLISH
F INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• Section the hair prior to styling. Style the lower layers first.
• Plug the product into the mains power supply.
• Press and hold the on button to switch on.
• When the styler is plugged in but not turned on a lock symbol will show in
the display window indicating the styler is in standby mode L.
• Select the desired temperature.
• To adjust the temperature use the +/- temperature controls on the side of the
product. '+' increases the temperature '-' decreases the temperature.
, Recommended temperatures:-
Temperature
120°C - 170°C
170°C - 200°C
200°C - 210°C
• The selected temperature will flash continuously until the desired
temperature is reached.
• Working on one section at a time, open the tong clip, place a section of hair
in between the tong clip and barrel and release the clip at the end of the
hair.
, NOTE: for best results, ensure the ends of the hair are under the clip. If they
aren't, gently glide the styler down the hair until you can no longer see the
ends.
• Wait about 10 seconds for the curl to form.
• Unwind the hair and release the curl.
• Repeat this around the head to create as many curls as desired.
• After use, press and hold the off button to turn off then unplug the
appliance.
4
Hair Type
Thin/fine, damaged or
bleached hair.
Normal, healthy hair.
Thick, very curly and
difficult to style hair.