Samsung 4+ Serie Manual Del Usuario página 11

3
b Wired Network
4
Software Upgrade:
Upgrade the software
to the latest version.
5
Auto Program (1):
Select where your TV
signal comes from.
6
Auto Program (2):
Select the search
options
7
Auto Program (3):
Channel memorization
8
Clock : Set the Clock
9
Setup Complete
If You Want to Re-run Setup...
O
MENU → System → Setup → ENTERE
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. The Function
menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. The Store Demo
mode is set. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to
Source(s) and hold for more than 5 seconds. See page 13 for information about the Controller.
The TV checks the network connection, then displays the "Wired network and Internet
connection complete" message appears and highlights Next. Press ENTERE.
On the Software Upgrade screen, press the ENTERE button to upgrade the TV's
software. If new software is available, the player downloads and installs the new
software. When the download is complete, select Next, and then press ENTERE.
✎
To upgrade later, select Skip, and then press ENTERE. For more
information, see "Software Upgrade" in the e-Manual.
✎
You can only upgrade software if your TV has an active network connection.
✎
If no update software is available, the Auto Program screen appears
automatically.
Press the ▲ or ▼ button to select the correct option, and then press ENTERE twice.
Let's find and store channels on your TV. Do you need to search for channels?
y Yes, I need to.: Select if you have an antenna or a cable connection without a set-
top-box, and then go to Auto Program (2) below.
y No, I don't need to.: Select if you have a satellite or cable set-top-box. You do not
need to run Auto Program. Select Next or Skip, and then go to 8 Clock - Manual
below.
1. Press ENTERE. The Air/Cable screen appears.
2. Press the ▲ or ▼ button to select Air or Cable, and then press ENTERE. A
check appears next to your selection. Select Next, and then press ENTERE. You
can check both if you have both connected.
3. If you selected Air, channel memorization starts. Go to 7 Auto Program (3). If you
selected Cable, you'll go to the Cable System screen. Use the▲ or ▼ button to
select Digital Cable System, and then press ENTERE. Use the ▲ or ▼ button
to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTERE. Most cable systems use STD. Repeat the same process for Analog
Cable System.
4. When done, select Next, and then press ENTERE.
Channel memorization starts. Channel memorization can take up to 45 minutes.
When channel memorization is complete, the Channels Memorized screen appears.
Press ENTERE. The Clock screen appears.
✎
You can press ENTERE at any time to halt the memorization process.
Press the ▲ or ▼ button to select Auto or Manual, and then press ENTERE twice.
Auto
If you selected Auto, you'll go to the Time Zone screen, and then the DST screen. On
the Time Zone screen, use the ▲ or ▼ button to select your time zone, and then press
ENTERE twice. On the DST screen, select whether to turn DST (Daylight Savings
Time) On or Off, and then press ENTERE. When done, press ENTERE.
Manual
If you selected Manual, select Date, and then press ENTERE. Use the number
buttons or the ▲ or ▼ button to set the date. Use the ◄ or ► button to move between
entry fields. When done, press ENTERE. Select Time, and then press ENTERE.
Set the time in the same fashion. When done, press ENTERE. Then, select Next, and
then press ENTERE. The Setup Complete screen appears.
Review the Setup data, and then press the ENTERE button.
English - 11