Operation - Testboy TB 27 Digital Manual De Instrucciones

Operation

Operation
Connect the transmitter line (1) to a wire of the
cable for which you are searching.
Press with switch (4) for a long period to
activate the transmitter (1) and select the test
sound (3) (continuous or alternating tone).
Depress the switch (5) for a long period to
activate the receiver (2) The sensitivity can be
adjusted to the ambient conditions.
Start with the tip (6) of all cables which come
into question.
The loudest sound is received from the cable
searched for.
1. Transmitter
2. Receiver
3. Selector switch
(continuous or alternating tone)
4. Transmitter on / off switch
5. Receiver on / off switch
6. Tip of the receiver
7. Rotary switch for transmitter signal strength
8. Rotary switch for receiver sensitivity
9. Signal strength display
10. Power display (transmitter)
11. Power display (receiver)
12. Display test sound
Example of use 1:
Connect the transmitter lines (1) with both sides of the limit wire to trace the installation of the
limit wire.
Activate the transmitter (1) and select the test sound (3) (e.g. continuous tone).
Activate the receiver (2). The sensitivity can be adjusted to the ambient conditions.
Start with the tip (6) of the charging station to trace the limit wire.
16
®
Testboy TB 27 Digital