Promise Technology SUPERTRAK EX12350 Guia De Inicio Rapido página 7

3. Attach the Y-cable power splitters to each of the disk drives.
4. Optional. Attach cables from the LED pins on the SuperTrak card (see the
diagrams below) to the activity LEDs in your enclosure.
Step 4: Create a Logical Drive
You will now use the onboard SuperBuild BIOS utility to create a logical drive with
the attached drives. Even if you plan to use the WebPAM software to manage
your logical drive, you can still create your first logical drive using the SuperBuild
Utility, as described here.
For an explanation of the logical drive concepts, see Chapter 6 of the SuperTrak
EX12350 User Manual on the CD.
1. Boot your system. If this is the first time you have booted with the SuperTrak
card and drives installed, the Promise onboard BIOS will display the
following screen.
LED pinouts for SuperTrak EX12350
LED5-8
LED9-12
SuperTrak Installation Task List
All LEDs
– +
7